1. How and where can I order the Baudoctor Aerolight Thermal Insulation and Mold Protection System?
The Baudoctor Aerolight Thermal Insulation and Mold Protection System can be purchased directly from us, with a minimum order quantity of one pallet. For smaller orders and orders outside the country, please contact our authorized dealers. Send us an email inquiry, and we will provide you with the dealer contact information.
2. How many square meters can be covered with one liter of the various BAUDOCTOR products?
High-Tech Filler: One liter generally covers about 1 square meter.
Coating: One liter covers approximately 5 square meters.
Primer Plus: Je nach Beschaffenheit des Untergrunds kann ein Liter ca. 5 Quadratmeter abdecken.
Mold Clean: Depending on the severity of mold infestation, one liter covers about 10 square meters.
3. What is the dew point and how does it affect the wall surface?
Moisture Issues: Condensation forming at temperatures below the dew point leads to mold and damage.
Insulation and Energy Efficiency: Good insulation prevents walls from cooling down.
4. What is the lifespan of the Baudoctor Aerolight System?
Baudoctor offers guaranteed thermal insulation for a minimum of 15 years.
5. Is the Baudoctor Aerolight System harmful to health?
Baudoctor is completely safe for both people and the environment.
6. How should the Baudoctor Aerolight System be stored?
Baudoctor should be stored and transported at temperatures between +5°C and +25°C.
7. How can energy efficiency be verified?
To verify energy efficiency, it is important to completely eliminate thermal bridges. A high-quality thermal imaging camera is used for this purpose.
8. Can the Baudoctor Aerolight System be ordered online?
Currently, online ordering is not yet available.
9. Can the Baudoctor Aerolight System be ordered in color?
Yes, Baudoctor Aerolight Coating can be tinted in any pastel color, but only with a minimum order quantity of 5 pallets.
10. Can the Baudoctor Aerolight System be painted over?
Yes, it can be painted over with a light silicate or lime-based paint.
11. What advantages does the BAUDOCTOR Aerolight Thermal Insulation and Mold Protection System offer over panel systems?
1. Thinner layer thickness / Space-saving
2. Flexible and adaptable
3. Preservation of historical structures
4. Durable and low-maintenance
5. Quick and easy application
6. Cost efficiency
7. Applicable for both interior and exterior
8. Less prone to application errors
12. Why is thermal insulation important?
1. Energy Savings: Reduces heating costs and contributes to climate protection.
2. Comfort: Prevents drafts and cold walls in winter as well as overheating in summer.
3. Mold Prevention: Minimizes the risk of mold by reducing condensation formation.
4. Health Protection: Prevents health issues caused by mold.
5. Preservation of Building Structure: Protects the building substance from long-term moisture damage.
6. Improved Energy Efficiency: Prevents thermal bridges and increases efficiency.
7. Adaptability: Flexible for both interior and exterior insulation, especially for listed buildings.
13. What is the optimal preparation for the BAUDOCTOR AEROLIGHT Thermal Insulation and Mold Protection System?
1. Surface Preparation: Ensure a dry, smooth, and clean surface.
2. Repair Work: Fill cracks and holes with repair filler.
3. Sanding Irregularities: For an even application.
4. Remove Old Paint: To improve adhesion.
5. Priming: Use BAUDOCTOR PRIMER PLUS, drying time 6-8 hours.
6. Recommended Layer Thickness: 1-1.5 mm, for severe thermal bridges up to 2-3 mm.
14. What are the causes of mold formation and preventive measures?
1. Moisture: Mold requires moisture.
2. Insufficient Ventilation: Leads to damp conditions.
3. Thermal Bridges: Cold bridges encourage condensation.
4. Building Materials and Furniture: Porous materials provide a breeding ground for mold.
5. Temperature: Mold grows at 20-30°C but can also develop at other temperatures.
6. Insufficient Insulation: Leads to cold surfaces and condensation.
15. Tips for Proper Heating and Ventilation Heating:
Heating
1. Heat evenly.
2. Adjust temperature (around 20°C in living areas, 18°C in bedrooms).
3. Do not let the temperature drop too much at night.
Ventilation:
1. Air out several times a day.
2. Avoid leaving windows in the tilt position.
3. Use cross-ventilation.
16. What is the ITB?
ITB stands for the Polish Institute of Building Technology (Instytut Techniki Budowlanej). The ITB is a partner of the German Institute for Building Technology (DIBt). Approvals issued by the ITB and DIBt are recognized as equivalent in their respective countries and within the European Union. This means that an ITB approval is recognized as equivalent to a DIBt approval in Germany.
17. What is TZÚS?
TZÚS stands for the Czech Institute of Building Technology. The ITB is a partner of the German Institute for Building Technology (DIBt). Approvals issued by the ITB and DIBt are recognized as equivalent in their respective countries and within the European Union. This means that an ITB approval is recognized as equivalent to a DIBt approval in Germany.
"Technický a zkušební ústav stavební Praha, s.p." (TZÚS Praha) is a member of the European Union of Agrément (UEAtc). The UEAtc is an organization that coordinates and harmonizes technical approvals and certifications in the construction industry at the European level.
„Technický a zkušební ústav stavební Praha, s.p.“ (TZÚS Praha) ist Mitglied der European Union of Agrément (UEAtc). Die UEAtc ist eine Organisation, die technische Zulassungen und Zertifizierungen im Bauwesen auf europäischer Ebene koordiniert und harmonisiert.
English (UK) 
Deutsch